Coverage Explained

Machinery Manufacturer Insurance: What Builders Need

A machine spindle and collet chuck lowered toward a clamped workpiece, with coolant nozzles aimed at the tool

Machinery manufacturer insurance is a program of several policies, not a single form: products liability for the machines you ship, property and equipment coverage for the plant that builds them, workers compensation, and often errors and omissions plus coverage for installation and service work on the customer’s floor. Each piece answers for a different stage of a machine’s life.

Following a machine through its life

The clearest way to build a program for a machinery builder is to follow a machine from the drawing to the scrapyard, because the coverage in play changes at each stage. This is where a company that designs and builds machines differs from a shop that only runs them, and it is why a general manufacturing insurance program needs adjusting for a builder.

During design and build, the exposure is at your plant. The building, your production equipment, purchased components and the half-finished machine on the assembly floor are property exposures, and the people building it are a workers compensation exposure.

Shipment and installation move the risk off your premises. The machine rides on a truck, hangs from a rigger’s crane, and sits on a customer’s floor while your technicians wire, level and commission it. Property coverage written for your plant often does not follow it there, and your crew is now working in someone else’s building.

Once the customer accepts the machine, it becomes a product. Any injury or damage it causes from that point is usually a products liability and completed operations question, and it stays that way for as long as the machine runs. A separate question runs alongside: whether the machine does what the purchase order said it would. That is a financial claim, not an injury claim, and it usually belongs to a different policy.

Design and build

The plant, your production equipment, work in progress
Property, equipment and business income

Shipment and installation

The machine on the road and on the customer’s floor
Transit and installation coverage, your crew on site

In service at the customer

Injury or damage caused by the machine
Products liability and completed operations

When it does not perform

A financial loss with no injury
Errors and omissions, depending on the wording

Which coverage is usually in play at each stage of a machine’s life. Forms vary, so the policy wording decides. No figures are shown.

Products liability for machines that stay in service for years

Products liability is usually the coverage that matters most to a machinery builder, because a machine keeps working, and keeps being able to hurt someone, long after the invoice is paid. An operator caught in a pinch point, a hydraulic line that lets go, or a control fault that starts a fire in the customer’s plant are the claims this coverage is commonly built around. It normally sits inside the general liability policy as products and completed operations, and our article on products liability versus general liability for manufacturers explains how the parts relate.

Long service life is what sets industrial machinery insurance apart from coverage for a consumable product. Your oldest machines may still be running in plants you have never visited, resold through a dealer, moved, rebuilt, or fitted with someone else’s tooling. The customer may have removed a guard or bypassed an interlock. The model may be long discontinued. None of that reliably keeps your name off the claim, and the policy in force when the injury happens is usually the one asked to respond, not the policy you held when the machine shipped.

That makes continuity important. Check how the form treats discontinued models and products made by a company you acquired, and understand whether the policy is written on an occurrence or claims-made basis, a difference our guide to occurrence versus claims-made coverage walks through. Keep build records, manuals and change orders for as long as the machines are likely to run. They are often the best evidence of how the machine left your plant.

Design responsibility and machines that fail to perform

A machinery builder answers for the design, not just the workmanship, and that covers guarding, controls, warnings and the manual as much as the frame and the drive. When a design choice leads to an injury or to physical damage, the claim usually comes back through products liability. Many of your customers’ plants work under OSHA’s general requirements for all machines, the federal machine guarding standard, and they often expect the machine to arrive ready to fit into that environment.

The harder case is the machine that hurts nobody and damages nothing but does not do the job. It cannot hold the cycle time in the specification, or it produces scrap, and the customer claims lost production and the cost of a replacement. General liability forms commonly do not respond to that kind of purely financial loss, and many exclude the cost of repairing or replacing your own product. This is the territory of manufacturers errors and omissions, which may respond depending on its wording.

Treat that coverage carefully. Forms differ widely, many exclude contractual performance guarantees, liquidated damages or the cost of making your own machine right, and some are written narrowly around design or specification errors. Our explainer on manufacturers errors and omissions covers the mechanics. For a custom builder, the practical step is to put a real purchase contract in front of your agent and ask which promises in it the policy would and would not respond to.

Installation, commissioning, and field service

Installation is the stage where coverage most often has a gap, because the machine and your people are both away from the plant your policies were written around. A finished machine on a flatbed, on a rigger’s skates or bolted to a customer’s floor before acceptance is usually insured through transit and installation coverage, commonly written as inland marine. The limit should reflect the most valuable single machine you ship, and the form should follow it through rigging and testing, not stop at the truck.

Who bears the loss depends on your sales terms. If title and risk of loss pass when the machine leaves your dock, the customer may carry the transit exposure. If they pass at acceptance after commissioning, you likely carry it through every lift. Many builders sell on mixed terms without realizing it, so read the terms against the policy.

Real-World Scenario: A builder of custom packaging lines ships a finished machine to a food plant several states away, sold on terms that leave it the builder’s property until it passes acceptance testing. During rigging the machine tips and the frame is bent beyond repair. The builder’s property policy turns out to be written for the plant and its contents, with only a small extension for property away from the premises. The rigger’s contract limits its responsibility. The builder rebuilds the machine largely at its own expense and adds installation coverage before the next shipment.

Your technicians on the customer’s site create a liability exposure for damage they cause there, which general liability commonly addresses, and an injury exposure of their own. Workers compensation usually follows employees who travel, but work in other states or other countries can call for the policy to be set up differently, so tell your agent where crews actually go and how long they stay.

The plant that builds the machines

The plant side of a machinery builder’s program is ordinary in form and unusual in values, because a single machine on the assembly floor can represent months of engineering and labor. Property coverage usually applies to the building and contents, but ask how work in progress is valued. A form that pays only for materials leaves the labor and engineering already invested uninsured.

Your own production equipment needs the same attention as the machines you sell. Machining centers, cranes, weld cells and test stands can fail mechanically or electrically, and standard property forms often do not treat that as a covered loss. Our machine and equipment coverage page explains how breakdown is usually handled.

Business income deserves a hard look too. Machinery builders depend on long-lead components such as large castings, drives and controls. If a fire destroys a component that takes many months to replace, the delay can outlast the repair of the building, and delivery penalties in your contracts may not be something the form pays. The article on business interruption for manufacturers covers how the restoration period works.

Customer contracts and the suppliers behind your components

Purchase contracts for machinery routinely ask for more than a standard policy gives without endorsement. Customers commonly want additional insured status, stated limits, waivers, and an indemnity clause that reaches well past your own negligence. Whether your policy backs a given promise depends on its endorsements, which our guide to additional insured status for manufacturers explains. Have the insurance and indemnity clauses reviewed before you sign, not when the certificate request arrives.

When a contract calls for limits above your primary policies, an umbrella is usually how they are met. Confirm that it sits over products and completed operations and does not carry exclusions the primary policy lacks.

Look in the other direction as well. A machine is assembled largely from other companies’ motors, valves, sensors and controls, and when a purchased component causes the loss, you are usually the name on the nameplate and the party sued. Ask key suppliers for evidence of products coverage and, where you have the leverage, vendor status on their policy. Imported components from suppliers with no reachable insurance leave the whole claim with you.

What an underwriter asks a machinery builder

An underwriter looking at equipment manufacturer insurance wants to understand the machines before the financials. Expect questions about what the machines do and which industries buy them, because a press or a shredder is read differently from a conveyor. Who operates them matters, as does how much of the design is yours versus built to a customer’s print.

Guarding, warnings and manuals come next: whether guards are standard or optional, whether you keep signed acceptance records, and how you handle field modifications and retrofits. Underwriters often ask how long models stay in service, whether you still support discontinued lines, and whether you sell used or rebuilt machines. Export sales get their own questions, since coverage territory and the countries where suits can be brought vary by form.

Loss history closes the picture, including claims that were defended and dropped. Machinery and equipment manufacturing insurance is placed more easily when the submission includes sample contracts, a manual, and a plain account of installation and service work.

If you want a program reviewed against the machines you actually build, send us your details: what the machines do, who buys them, how they ship and who installs them.

The bottom line

A company that designs and builds machines needs a program that follows each machine from the drawing to the customer’s floor and through its working life, because the plant, the shipment, the installation, the injury claim and the performance claim usually sit on different policies with different wording.

Frequently asked questions

What insurance does a machinery manufacturer need?

A machinery manufacturer usually needs a program of several policies. Most builders carry general liability with products and completed operations, property and equipment coverage for the plant, workers compensation, and commercial auto. Many add transit and installation coverage, errors and omissions for performance claims, and an umbrella when customer contracts ask for higher limits. The mix depends on what the machines do and how they are sold and installed.

Does products liability cover a machine I sold years ago?

Often yes, if the policy is in force when the injury or damage happens and the form does not exclude that product. On an occurrence form, the date of the injury usually decides which policy responds, not the date of sale. Discontinued-product exclusions, claims-made wording and retroactive dates can change that answer, so ask your agent how older machines still in the field are treated.

Is a machine covered while it is being installed at the customer’s plant?

Not automatically. Property coverage written for your plant often stops at your premises or limits property that is away from it. A machine on a truck, on a rigger’s hook or on the customer’s floor before acceptance is usually insured through transit and installation coverage, commonly an inland marine form. Who owns the machine at that moment depends on your sales terms.

Do I need errors and omissions if I build custom machines?

It is worth reviewing closely, because custom builders take on performance promises that general liability usually does not address. If a machine fails to reach the specified output and the customer loses money without anyone being hurt or anything being damaged, a liability form often does not respond. Errors and omissions may, depending on its wording, its exclusions and how the contract was written.

Does my insurance cover machines I export?

It depends on the coverage territory and the suit provisions in your policy. Many liability forms respond to products sold abroad only if the claim is brought in certain countries, and some limit foreign sales further. A builder that ships machines overseas, or installs them there, should tell the underwriter where they go and ask whether foreign liability or foreign workers compensation coverage is needed.

Who is responsible if the customer modifies the machine?

There is no fixed answer, because it turns on the facts, the contract and the court. A customer who removes a guard or rewires the controls has changed the machine, and that is often part of the builder’s defense, but the builder is commonly still named in the claim. Your products liability policy usually pays to defend it, subject to its terms. Good records of how the machine left your plant help.

About the author

Nate Jones, CPCU

Nate Jones, CPCU, is the founder of Wexford Insurance and Machine Guard Insurance, a specialty insurance agency placing machine shop and manufacturer coverage in 48 states across a 20-carrier specialty panel. He places programs for companies that design and build industrial machinery, so he works through products exposure on machines long in the field, installation and transit risk, and performance claims with the builder before a submission goes out. Connect via the Machine Guard Insurance quote form or call 317-942-0549.

Insure your shop or plant with a CPCU-led agency

Tell us what you machine or make — a job shop, a product manufacturer, or both — and we will market it to carriers that write the class.