Coverage Explained

Manufacturing and Machining Insurance — Job Shop vs. Manufacturer

A cutting tool in a machine spindle poised above a workpiece held in a vise

Manufacturing and machining insurance starts to look different the day a job shop begins selling a product it designed, rather than parts made to a customer’s print. Once the shop owns the design, the part number, or the brand name, an underwriter reads the operation as product manufacturing, and the exposure follows the product.

Making for others versus making your own

A job shop makes what a customer drew. The customer owns the design, picks the material and tolerance, and decides how the part is used. The shop answers for how well it followed the print. Most liability programs for contract machining are built on that picture, and our page for machine shops describes how such a program is usually assembled.

A product manufacturer makes what it decided to make. It chose the design, set the specification, wrote the instructions, and sold the result under its own name. If the item fails, the first question is not whether the shop followed a print. It is whether the product was sound, and the shop is the party that decided what the product was. The coverage conversation for that kind of operation sits on the manufacturing side.

Most shops do not flip from the first description to the second overnight. They drift: a repeat customer wants a standard bracket, the shop stocks a few, and a catalog page appears. Each step is reasonable, and the sum is a different business than the shop described on the application.

Signals that move a shop toward manufacturer rating

An underwriter does not need a company to announce that it has become a manufacturer. The signals show up in ordinary answers, and several together matter more than any single signal.

  • Parts carry the shop’s own part numbers rather than the customer’s.
  • The shop’s name or logo is marked, stamped, or labeled on the part.
  • The shop owns the drawings, and no customer print exists.
  • Items are sold from stock, through a catalog, a website, or a distributor.
  • The shop packages the item with instructions, labels, or a warranty.
  • Buyers are end users, not other manufacturers who will inspect and incorporate the part.
  • The shop wrote the specification that describes what the item will do.

A shop with a single signal, such as a stamped date code, is not necessarily a manufacturer. A shop with most of them is. The point of the list is to tell you which of your own answers an underwriter will weigh, so you can raise them yourself rather than be asked about them after a loss.

Your name or part number on the product

Putting your name or part number on a part tells everyone downstream who stands behind it. A buyer who finds your name on a failed item looks to you, and a plaintiff’s attorney does the same. Whether a particular legal result follows is a question for counsel, and this article does not offer a view on it. The insurance point is simpler: carriers commonly ask whether you sell products under your own name, and a yes changes the questions that follow.

A part number matters for a related reason. When a shop machines to a customer’s number, the record of who designed the part is built into the number. When the shop assigns its own, the record points back to the shop. That is the same shift, expressed in the shop’s paperwork.

Private labeling runs the other direction. Some shops make a product that another company sells under its brand. The shop still made it, and the other company’s name does not remove the shop from the picture. Ask your agent how the policy treats products sold under someone else’s label, and make sure the contract with that company states who carries which obligation. Our article on what manufacturing customers require covers the contract side.

Assembly, kits, and finished goods

Assembly sits in the middle of the spectrum. A shop that machines a part hands over a component, and the customer decides how it is used. A shop that presses, fastens, wires, or tests parts into a subassembly hands over something closer to the finished item. If it fails, the failure is harder to trace to a single component, and the assembler is easier to point to.

Kits are a smaller version of the same change. Bundling parts, hardware, and instructions into a package sold as a unit means the shop has chosen the combination. The combination, not just the parts, becomes the product.

Finished goods complete the move. A shop that builds a complete item for sale, such as a tool, a fixture, a trailer component, or a consumer fitting, carries the full set of product exposures: design, manufacture, instructions, and labeling. Assembly work for a customer under their drawing and their name can remain contract work. The same assembly sold under the shop’s name is manufacturing. What the shop did on the bench may be identical, and the rating can still differ.

Real-World Scenario: A machine shop that turned parts for several equipment makers noticed that a repeat customer kept ordering the same adjustable bracket. The owner drew a version of his own, assigned it a part number, stamped the shop’s name on it, wrote a short installation sheet, and listed it on the shop’s website. Orders came in from small repair businesses the shop had never worked for. The shop’s policy was still written for contract machining, so at the next conversation the agent had to explain that the bracket changed the picture, ask who bought it and how it was used, and take the new product to the carrier before more shipped.

Job shop

Builds to the customer’s print
Customer owns the design
Customer’s part number
Exposure: workmanship

Assembler

Combines parts into subassemblies
Design may still be the customer’s
Kits blur the line
Exposure: the combined item

Product manufacturer

Owns the design and the name
Own part numbers and warranty
Sells to end buyers
Exposure: the product itself

The spectrum from building to a customer’s print to selling your own product, with the design, the name, and the exposure moving toward the shop as you go right. No figures are shown.

Warranties and specifications you wrote

A warranty is a promise about performance, and a specification is a description of what the item will do. When a customer supplies the specification, the shop promises to meet it. When the shop writes the specification, the shop has made the claim about the product, and a buyer can rely on it.

That difference matters for a pair of reasons. First, a written claim about performance becomes the standard a failed item is measured against. Second, many liability forms are written around bodily injury and property damage, and a dispute that is only about whether the product met its stated performance may not fit those forms the same way. Coverage for that kind of claim, if it exists at all, usually comes from a separate policy, and the wording decides. Our page on manufacturers errors and omissions explains the idea, and the article on professional liability for machine shops looks at where design and advice exposures arise for contract shops.

Warranty language on a quote, an invoice, or a website counts. So do catalog statements about ratings and uses. Before a product ships, someone should read every statement the shop makes about it and ask whether the shop can stand behind each word.

How an underwriter reads the change

An underwriter reads the application as a description of the business that will be rated. When the shop adds a product, the questions broaden. Expect to be asked what the product is, who buys it, how it is used, whether it goes into other equipment, whether it is sold outside the country, and whether the shop designs it. Answers that describe a safety-critical or consumer-facing item draw more scrutiny than answers describing a plain industrial component.

The mechanics of rating can also shift. For contract work, the rating basis for general liability is commonly built on sales or payroll within a manufacturing or machining classification. A product line can add exposure that follows the item after it is sold, which is the area covered by products-completed operations. Depending on the carrier and the form, the carrier may price that exposure separately, apply different terms, or add an exclusion until it understands the product. These mechanics vary, so treat them as what to ask about, not what will happen.

The structure of the liability program matters too. Our articles on products liability versus general liability and on how the products coverages differ show how the pieces fit. The base general liability policy is where products exposure often sits, and the form decides how it is handled.

A product also brings the question of removal from the market. If an item must be pulled back, a liability policy does not usually pay the cost of the recall itself; a separate product recall policy exists for that, and our article on what triggers a recall claim walks through the sequence. Whether a small product line needs it is a judgment to make with your agent.

Telling your agent before the first product ships

Tell your agent before the first product ships, and bring documents rather than a verbal summary. A carrier can write terms in advance, and a policy changed after a claim cannot help with that claim.

Bring what an underwriter would ask for:

  • A description of the product and who buys it.
  • Drawings or photographs, and a note on who designed it.
  • The labels, instructions, warranty text, and catalog or web copy.
  • A statement of how it is sold: directly, through a distributor, or under another company’s name.
  • A plan for the first run, including testing and records of the lot.
  • Any customer contract that mentions the product.

Ask these questions. Is the product described on the policy, and how? Does the form treat products sold under my name the same as parts made to a print? And what does the policy do with a claim that arises after the product has been in the field for years? That last question brings in whether the policy is written on an occurrence or claims-made basis, which our article on occurrence versus claims-made coverage explains.

None of this changes the work on the floor. It changes the paperwork that lets the work be insured accurately. When you are ready, tell us about the product: what it is, who designed it, how it is sold, and whose name is on it. We will build the program from that description.

The bottom line

A job shop becomes a product manufacturer in the underwriter’s eyes when it owns the design, the part number, or the brand, so tell your agent before the first product ships and let the policy wording confirm how it is rated.

Frequently asked questions

When does a job shop count as a product manufacturer for insurance?

Usually when the shop stops building only to a customer’s print and starts selling something it designed, numbered, or branded itself. An underwriter looks at who owns the design, whose name is on the part, and who sells the finished item. The application and the policy wording decide the classification, so describe the change plainly to your agent.

Does adding a product line change a machine shop’s liability coverage?

It can. A product line adds exposure that follows the item after it leaves the shop, so the carrier may rate the liability policy differently and ask new questions. Many forms are written around the operations described on the application. Report the new line before it ships so the policy reflects what the shop actually sells.

Does putting my name on a part change my exposure?

Often it changes how the part is viewed. A brand name or your own part number tells a buyer, and an underwriter, that you stand behind the item as its maker. Carriers commonly ask whether you put your name on products. Disclose it on the application and ask your agent how the policy treats branded items.

Is assembling parts for a customer the same as manufacturing?

Not always, but it sits closer to manufacturing than machining a single part does. Assembly means your work becomes part of a finished item, and a failure may be traced to the whole. Whether it is rated as contract assembly or manufacturing depends on who designed the item and who sells it. Describe the assembly work to your agent.

Who is responsible for a specification the customer supplied?

That depends on the contract and the facts of the job, so it is not something a blog post can settle. Building exactly to a customer’s print generally puts design questions with the customer, but your workmanship still matters. Keep the signed print and revision records, and ask your agent how the policy and your contracts fit together.

Should a shop update its policy before launching its own product?

Yes, tell your agent before the first product ships. A policy rated for contract machining may not match a shop that sells finished goods, and a gap can surface only after a claim. Give the carrier a description of the product, who buys it, and how it is sold so any changes are made in advance.

About the author

Nate Jones, CPCU

Nate Jones, CPCU, is the founder of Wexford Insurance and Machine Guard Insurance, a specialty insurance agency placing machine shop and manufacturer coverage in 48 states across a 20-carrier specialty panel. He places coverage for shops that began as contract machinists and later added their own products, so he sees how a carrier re-rates the operation once the shop owns the design and the name. Connect via the Machine Guard Insurance quote form or call 317-942-0549.

Insure your shop or plant with a CPCU-led agency

Tell us what you machine or make — a job shop, a product manufacturer, or both — and we will market it to carriers that write the class.