A Michigan tool and die business usually carries property coverage that reaches customer-owned tooling and dies in its care, equipment breakdown for presses, EDM and machining centers, general liability with products and errors and omissions for tooling that fails to perform, and workers compensation. Michigan’s automotive supply chain and state rules shape how each line is set.
Customer-owned tooling and the tooling agreement
Customer-owned tooling is usually the largest value in a Michigan toolroom that the shop does not own, and the tooling agreement often decides who insures it. An automotive program typically pays for its dies, molds and checking fixtures, and the customer holds title even while the steel sits on your floor. That is where most confusion begins.
Tooling agreements and supplier terms vary. Some state that the customer insures its tooling wherever it is. Others make the toolmaker responsible while the tool is in its care, sometimes for full replacement, and sometimes they ask to be named on your property policy as a loss payee. Read the actual language rather than assuming the customer carries it, and keep the agreement in the same file as your policy.
Your property form is the other half of the answer. Many forms insure your own business personal property first and treat property of others through a separate limit or extension. Ask whether that limit is large enough for the most valuable die on your floor, whether it applies while a tool is being cut or welded, and how it is valued. Our article on equipment failure that damages customer parts works through the property-of-others question in detail, and the general toolroom picture is covered in our guide to tool and die shop insurance.
Dies at the customer’s press shop after delivery
Once a die leaves your dock for the customer’s press shop, your exposure usually shifts from property to liability. The tool now belongs to the customer’s production, and the question becomes what happens when parts it produces fail or the die itself damages the press it runs in.
General liability with products and completed operations is the line commonly aimed at injury or damage after your work leaves your hands. A cracked bracket that hurts someone, or a die component that breaks and damages the customer’s press, are the kinds of claims that may reach back to the toolmaker. Many forms exclude damage to the die itself, since it is your own work, so the coverage tends to respond to what the die damaged rather than to the die.
Ownership at that stage matters too. If the customer already owns the tool and it is damaged in the customer’s plant, the customer’s own property program is often the first place that loss goes, unless a contract shifts it back to you. Michigan’s products clock also runs on state law, under MCL 600.5805(12), and the Michigan page explains it. That is one reason the choice between occurrence and claims-made wording deserves a deliberate decision for a shop whose tooling keeps producing parts long after delivery.
Equipment breakdown for presses, EDM and machining centers
Equipment breakdown is the line that commonly answers when a tryout press, wire EDM or machining center fails from the inside. Standard property forms are written around fire, wind and similar perils, and many do not respond to a burned-out spindle motor, a failed hydraulic pump or a controller damaged by a power surge.
For a Michigan toolroom, the concern is less the repair bill than the wait. Large presses, big-bed machining centers and certain EDM units are often built to order or sourced from overseas, and a replacement can take a long time to arrive. A breakdown form that pays expediting costs, such as air freight for a part or overtime for a technician, can shorten that wait, but whether it does depends on the endorsements.
Ask how the form values older equipment, since a used press may be replaced with a newer model at a very different price. Ask whether wear and gradual deterioration are excluded, as they commonly are. Our page on machine and equipment coverage explains how the line is built, and shops that also build machines for others should read our guide to machinery manufacturer insurance, which follows the product side of that business.
Tryout and approval failures as financial loss
A die that fails tryout is often a financial problem for the customer rather than an injury or property damage claim, and that is where errors and omissions comes in. If a progressive die cannot hold the customer’s dimensions, or a fixture misreads parts and the customer ships bad product, the loss may show up as scrap, sorting, rework at the customer’s plant and a program that slips.
General liability is built for bodily injury and property damage, and it usually does not respond to pure financial loss. Many forms also exclude the cost of redoing your own faulty work, so the time you spend recutting the die is commonly a business cost rather than a claim. Manufacturers errors and omissions coverage is designed for the gap between those exclusions: the customer’s financial loss when your product or work fails to perform as promised.
The more design responsibility a shop takes on, the more that line matters. A toolmaker that only cuts steel to an approved design often carries less of this exposure than one that designs the strip layout, selects the process and certifies the result. Keep tryout records, measurement reports and signed approvals with each job, because the file usually decides who answers for a failure.
Real-World Scenario: A tool and die shop outside Detroit builds a transfer die for a seat bracket on a new vehicle program. The die passes the shop’s own tryout, but at the customer’s plant the parts drift out of tolerance during launch, and the customer sorts and scraps parts while the die comes back for correction. The customer sends a bill for the sorting, the scrap and the overtime. The shop’s general liability carrier points to the financial-loss nature of the claim, and the question turns to whether the shop’s errors and omissions wording treats the failed performance as covered.
Launch delays and business income
A breakdown or fire in a toolroom can stall a customer’s vehicle launch, and business income coverage is the line meant for your own lost income while you recover. It usually responds after a covered physical loss at your location, often after a waiting period, and it pays lost net income and continuing expenses during the restoration period.
Two details matter most for a Michigan tooling shop. The first is the length of the restoration period, since a long-lead machine can keep the shop short of capacity well past the first repair. The second is whether a mechanical breakdown triggers income coverage at all, which usually depends on whether equipment breakdown is in the program and extends to business income.
A customer’s own losses from a delayed launch are a different question. Those usually come back as a contract claim, and whether any policy answers depends on what caused the delay and how your errors and omissions form is written. Our guide to business interruption for manufacturers explains how carriers measure the income side.
Michigan rules around the toolroom floor
Michigan’s floor rules come from its own state plan, and the state page sets out the detail. The Michigan Occupational Safety and Health Administration, part of the Department of Labor and Economic Opportunity, inspects private-sector workplaces under an OSHA-approved state plan, so a Michigan toolroom deals with MIOSHA rather than a federal area office. Guarding on tryout presses and lockout during die changes are where the serious injuries in a toolroom tend to start, and inspection history often reaches the underwriter.
Workers compensation in Michigan is bought from private carriers, with the Workers’ Disability Compensation Agency administering the system. Because the market is competitive, a shop’s classifications and loss history carry real weight. Booking toolmakers, machinists, welders and office staff in the classes that match how they actually work avoids surprises at audit. Our page on workers compensation covers the mechanics.
The state page also lists Michigan’s core industries, including mobility and automotive, advanced manufacturing, aerospace, defense, and life sciences and medical devices. Many toolrooms serve more than one of them, and each customer brings its own expectations. The Michigan state page holds the regulator detail, so check it rather than relying on a summary.
Tooling you own
Your presses, EDM and machining centers
Your steel, components and inventory
Breakdown and long-lead replacement
Tooling customers own
Dies and fixtures in your care
What the tooling agreement assigns
Property of others limits and valuation
Tooling that misses
Tryout and approval failures
Customer scrap, sorting and launch delays
Products and errors and omissions
People on the floor
Workers compensation from a private carrier
Guarding and lockout on tryout presses
Classifications that match the work
What automotive customers write into supplier terms
Automotive customers in Michigan commonly set the floor of a toolmaker’s program through their supplier terms, before price is ever discussed. Those terms often ask for additional insured status, specific products limits, umbrella limits above the primary policies, and sometimes errors and omissions or a waiver of subrogation.
Read each customer’s terms against your current policies, line by line, and ask your agent to confirm that the endorsements match the wording the customer asks for, not just the general idea. Our article on what insurance manufacturing customers require explains how those requirements usually read, and our guide to additional insured status for manufacturers covers the endorsement side.
When you want a program built around your tooling agreements and supplier terms, send us your details: the tooling you build, who owns it, the presses and machines the shop depends on, and the customers you ship to. We read the contracts alongside the policies, and the policy wording decides what responds.